worm reduction gearbox

Our worm gear reducers offer a choice of a solid or hollow output shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, however, can withstand shock loading better than other decrease gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s acceleration reducer products – has been serving industry reliably for over 40 years. Its verified modular style has set the market standard for performance and is the most imitated item in the current worm gear quickness reducer marketplace. But why accept a knock-off when you’re able to have the original – from EP Gear.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, along with greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales staff for help determining which gearbox answer is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and invite for a corner change with optional dual output. The reducers can be found in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our correct angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest operation of our speed reducers. These gearboxes are created to handle varying loads with little backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations supply the highest effectiveness and best result torque of most our swiftness reducers. These gearboxes are designed to handle varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the best choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating heat. Parallel shaft gearboxes possess the shortest amount of our inline equipment reducer options therefore they work very well in environments with limited space. Our parallel shaft equipment reducers provide an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a gear in the kind of a screw, also known as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other equipment reduction boxes. A principal benefit of worm equipment reducers is definitely that they produce an output that is 90° from the insight and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox offers right hand threads; to change the direction of the output, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio

If you discovered this details concerning worm reduction gearbox helpful, please visit our site to get more information.

Tags:

Recent Posts

gearboxes agricultural

As one of leading gearboxes agricultural manufacturers, suppliers and exporters of mechanical products, We offer gearboxes agricultural and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearboxes agricultural.