worm motor

Worm get gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where an easy to fit, high torque end result is required. Ideal for student based assignments including robots and buggies.
The unit has been designed so that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The motor is snap fitted into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where huge torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them ideal applicants for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, even at suprisingly low voltages. We advise that you utilize stall-detection sensors, or simply check out your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on small threaded end of the shaft, though it is not particularly intended to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors arranged new specifications for reliability, performance and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration at this point and a truly future proof answer. The Ever-Power gear electric motor offers total flexibility in mounting choices includes shaft, base, face, and flange alternatives. The motor terminal box could be mounted in choice positions rotated in 90º steps around the electric motor frame providing for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outside or in wet and dusty conditions without the usage of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a good part turn, optional dual output, or perhaps an inability for the electric motor to be back again driven. The DC right angle equipment motors are designed for continuous and intermittent duty procedure. Our right angle equipment reducers are designed with many mounting plate choices, making them ideal for a variety of DC electric motor based applications. You can expect 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a small package size. Worm Gear Motors are great for applications that want a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power used. On top of that, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Oral Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Products will work with you to create and produce a Worm Gear Engine that will optimize the performance of your specific application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Chop / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for toughness and a high torque output. Due to the special mechanical structure of the worm drive the engine output shaft is self locking and may not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Rated voltage is 12v and will achieve 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their strength in applications where high gear ratios are essential. Our worm geared motors happen to be therefore optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to meet your needs.
Worm gear models impress with their great power density and small style. If required, we can also source them with the impressive nsd tupH surface area treatment.
In addition to the basic EP casing, you can expect an extensive type of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These can be easily field installed, but we may also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm gear unit SMI
SMI worm gear models feature a clean, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for severe and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides diverse fixing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be designed by use of built-on add-ons (e.g. torque arm and output flanges). The housings are made in light weight structure out of aluminium die cast. Motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm wide, 40mm high, a good robust worm get gearbox powered by an MM28 engine (included), most suitable for applications where a simple to match, high torque end result is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where a simple to match, high torque productivity is required
Ideal for student based projects including robots and buggies
Reversible Excessive torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Substantial torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that is, in the case of motor without electrical, the outcome axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a better option compared to the spur gear motor. How come worm gear so special? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs result shaft) isn’t reversible when using large reduction ratios, because of the greater friction involved between your worm and worm-wheel, when usually a single start (one spiral) worm is used. This is often a advantage when it’s desired to remove any possibility of the output driving the input.”
In other words, it is challenging to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Tags:

Recent Posts

gearboxes agricultural

As one of leading gearboxes agricultural manufacturers, suppliers and exporters of mechanical products, We offer gearboxes agricultural and many other products.

Please contact us for details.

Mail: sales@gearboxes-agricultural.top

Manufacturer supplier exporter of gearboxes agricultural.