This standard range of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo electric motor technology, providing restricted integration of the electric motor to the machine. Angular backlash of significantly less than 1 arc-a few minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center distance) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide variety of motor couplings and installation flanges are available for assembly to practically all servo motors, and the hollow bore result can be utilized to mount result shafts, pinion shafts, or other drive elements.
Regular applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Device and Robotics.
helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for beneficial installation space.
The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors give you exceptional attenuation properties for the operation of your systems with low levels of vibration. This can be due to the longitudinal software of push on the insight shaft. This allows torque impulses to end up being prevented efficiently and for optimum results with regards to running smoothness and noise reduction to be achieved.
Both the equipment unit, and the synchronous servomotor are based on our modular system. This enables you to have fully individual configuration opportunities for every application. One matter is certain – Our servo gearmotors are genuine specialists for very particular requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a gear in the kind of a screw, also known as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are steel or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are significantly smaller than other equipment reduction boxes. A major benefit of worm gear reducers can be that they create an output that is 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox offers right hands threads; to change the direction of the output, a left-hand thread worm gearbox is necessary.
At times a motor’s capability could be limited to the stage where it requires gearing. As servo producers develop better motors that can muscle mass applications through more difficult moves and create higher torques and speeds, these motors need gearheads equal to the task.
We have even more details regarding worm drive servo.