China wholesaler Z type gearbox 3 stage gearbox ZDYZLYZSY model for paper making with Best Sales

Warranty: 3 years
Applicable Industries: Building Material Shops, Machinery Repair Shops, Food & Beverage Factory
Customized support: OEM
Gearing Arrangement: Bevel / Miter
Output Torque: 450-130000N.m
Input Speed: 4p,6p,8p
Output Speed: 134-1200r/min
Product name: cylindrical gearing arrangement reducer gearbox for apron feeder
payment terms: 40% advance payment, and the balance is paid before delivery
Material: Steel or cast iron
Gear material: High-strength low-carbon alloy steel
Material of housing: Aluminum Alloy, Cast Iron
Certification: CCC,CQM,Supplier Assessment, MA
Quality Control System: ISO9001:2008
Packing: Wooden box/ carton
Application: transmission in line / Elevating system / Carbarn / Packing machine
Input Form: IEC flange, connected with motor, solid shaft
Packaging Details: Small size: standard export packing (carton and pallet); Big size: fumigated wood carton or non-wood packing material carton
Port: HangZhou or HangZhou

Z type gearbox

Introduction of Z Series cylindrical gearboxes :
This product is an outer meshed involutes helical tooth cylindrical gearbox.It is widely applied to the fields of metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing and dyeing, pharmaceutical, etc.I. Characteristics1.The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to HRC58-62. All gear adapts NC tooth grinding process, high in accuracy and good in contact performance;2.High in transmission efficiency: single stage, more than 96.5%; double-stage, more than 93%; three-stage, more than 90%;3.Smooth and stable in run, low noise;4.Compact, light, High precise Planetary gearbox High Technology Planetary Gearbox Harmonic Drive Speed Reducer transmission reduction gearbox long life, high bearing capacity;5.Easy to disassemble, inspect and assemble.

II. Type, specification of speed reducer and its expressed method
1. Type: ZDY single-stage cylindrical gear speed reducer, ZLY double-stage cylindrical gear speed reducer,
ZSY three-stage cylindrical gear speed reducer, ZFY four-stage cylindrical gear speed reducer.
2. Specifications:

Single stage: ZDY80, ZDY100, ZDY125, ZDY160, ZDY200, ZDY250, ZDY280, ZDY315,ZDY355, ZDY400,
ZDY 450, ZDY500, ZDY560; Two-stages: ZLY112, ZLY125, ZLY140, ZLY160, ZLY180, ZLY200, ZLY224, ZLY250, ZLY280, ZLY315,
ZLY355, ZLY400, ZLY450, ZLY500, Customized bronze Worm gear and steel worm shaft best supplier ZLY560, ZLY630, ZLY710;
Three-stages: ZSY160, ZSY180, ZSY200, ZSY224, ZSY250, ZSY280, ZSY315, ZSY355, ZSY400,ZSY450,
ZSY500, ZSY560, ZSY630, ZSY710;
Four-stages: ZFY180, ZFY200, ZFY225, ZFY250, ZFY280, ZFY320, ZFY360, ZFY400, ZFY450, ZFY500,
ZFY560, ZFY630, ZFY710, ZFY800.

Technical Data:

StageModelRatioNominal Power (KW)Nominal Torque(N.m)ShaftSingle-stage80–5601.25–5.6350-4,793357-154,550Solid Shaft Double-stage112–7106.3–206.8-6,2291, 3814105712 Rubber Auto Parts Drive shaft Center Bearing for Mercedes Benz 162-426,541Three-Stage160–71571.4–1004-1,9054,075-519,520Four-Stage180–85710–5001.5-1,100

Products in factory

corners of factory:

Company InformationCompany information 1. Covers an area of 800,000 square meters,with more than 2,500 staffs
2. Annual year production ability is 1,000,000 sets
3. 20 year export experience all over the world
4. Professional engineer can help you to choose the best machine and give you the technical suport
5. Own complete quality, environment, occupation CZPT safety management system certification
and also a large number of domestic and foreign advanced equipment and detection equipment
6. Perfect management system, sophisticated equipment, high-quality workforce, coupled with
nearly 100 sales companies all around the domestic to implement fast network service and great
meet customer demand.
Packaging & ShippingSafety Packing Method :
1.Inside :Plastic bags with Chemical Desiccant For Gear Housing 2.Middle :Individual Carton packaging 3. Outside :Wooden Box

FAQQ1: Are you a manufacturer or trading company?
A1: A company integrated with industry and trade.
Q2: What about the shipping methods?
A2: For urgent order and light weight, you can choose the following express: UPS, FedEx, TNT,
DHL, EMS. For heavy weight, you can choose to deliver the goods by air or by sea to save cost.
Q3: What about the payment methods?
A3: We accept T/T, L/C for big amount, and for small amount, you can pay us by PayPal, Western
Union, Money gram, Escrow and etc.
Q4: How much does it cost to ship to my country?
A4: It depends on seasons. Fee is different in different seasons. You can consult us at all times.
Q5: What’s your delivery time?
A5: Usually we produce within 25-30days after the payment confirmed.
Q6: Can I print our logo/barcode/unique QR code/series number on your gearbox/electric motor?
A6: Yes, of course.
Q7: Can I order some sample for our testing?
A7: Yes, but it needs some expense.
Q8: Can you customize my product in special shape?
A8: Yes, we can offer OEM.
Q9: How can you make sure we will receive the product with high quality?
A9: Our QC team will inspect each batch of gearbox/ electric motor before delivery and all the raw
material we use aluminum and steel

For more detailed information, kindly please leave a message below, High Quality 180W Pump Motor for Coffee Bean Grinding Machine welcome to inquiry.

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China wholesaler Z type gearbox 3 stage gearbox ZDYZLYZSY model for paper making  with Best SalesChina wholesaler Z type gearbox 3 stage gearbox ZDYZLYZSY model for paper making  with Best Sales

Recent Posts

gearboxes agricultural

As one of leading gearboxes agricultural manufacturers, suppliers and exporters of mechanical products, We offer gearboxes agricultural and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearboxes agricultural.