China factory 4X4 70HP Diesel Engine Agricultural Machinery Tractor near me shop

Product Description

Tractor

HangZhou Huabo  Tractor Manufacturing  Co.,Ltd.

Lebushan Industry Park,HangZhou City,ZheJiang Porvince,China
 
 

HangZhou CZPT Tractor Manufacturing Co.,Ltd. Is established in 1996 which has been invested
51million and is located in Lebushan Industry park,Xihu (West Lake) Dis. District, HangZhou City,Close to Jiaoji Railway,
Qingyin Expressway,And convenient transportation.

Covering an area of about 140,000 square meters,it is a modern private enterprise integrating scientific research, production and marketing.the existing staff of more than 2000 people, including 10 technical staff, salers and foreign trade staff more than 20 people,products are sold to all over the world.

The company has strong technical force, excellent production equipment,advanced automatic assembly line, and various inspection equipments.The company is always adhered to the”quality first, customer first” approach to development.

WORK SHOP

WAREHOUSE

IMPLEMENTS

OTHER TRACTOR MODEL

Small tractor 
famuos engine, 8F+2R shift ,hydraulic steering system,double gear box, front and back balance, single clutch, big tank, single speed PTO,9.5-24 / 650-16, High back seats

 

Middle horsepower tractor :
YTO brand engine, TD16F+8R shuttle shift, hydraulic steering system, double gear box, double clutch, double speed PTO, front and back weight balance, 2 sets of multiple valves, 16.9-34 / 12.4-24 tire size

 

Big tractor 
famous engine ,TG1654 chassis, 16F+8R shuttle shift, hydraulic steering stytem,double gear box,double clutch,double speed PTO, front and back weight balance, 4 sets of multiple valves, Floating control, Adjustable axle, plastic engineering mailbox, new instrument panel, Reversing image, air cushion seat, power adjustable switch, alarm light,20.8-38/14.9-28 tire

VIEW MORE 

 

 

Products Model HX704
Wheel Drive 4*4
Horse Power 70
Dimension(L*W*H) 3350mm*1500mm*1860mm
Minimum Service Quality 1380KG
Front Wheel Tread 1000mm,1100mm,1200mm,1300mm
Rear Wheel Tread 960 – 1300 mm
Wheel Base 1750 mm
Minimum Ground Clearance 340 mm
Gear Shifts 12F + 12R
Tire Size 12.4-28 / 8.3-20
Engine Specification
Type Water Cooled Four Cylinder In-line Engine
Exhaust Emission Standards Europe 2
Rated Power 44.1kw
Rated Revolution 2400 r/min
Start Way Electric Start
Gear Box (4+1)*2
Clutch Single Piece Dry Type
PTO Speed Double Speed
Safety Frame 1
Awning 1
FOB Qingdao 5850.00USD
Products Model HX704
Wheel Drive 4*4
Horse Power 70
Dimension(L*W*H) 3350mm*1500mm*1860mm
Minimum Service Quality 1380KG
Front Wheel Tread 1000mm,1100mm,1200mm,1300mm
Rear Wheel Tread 960 – 1300 mm
Wheel Base 1750 mm
Minimum Ground Clearance 340 mm
Gear Shifts 12F + 12R
Tire Size 12.4-28 / 8.3-20
Engine Specification
Type Water Cooled Four Cylinder In-line Engine
Exhaust Emission Standards Europe 2
Rated Power 44.1kw
Rated Revolution 2400 r/min
Start Way Electric Start
Gear Box (4+1)*2
Clutch Single Piece Dry Type
PTO Speed Double Speed
Safety Frame 1
Awning 1
FOB Qingdao 5850.00USD

Worm Gear Motors

Worm gear motors are often preferred for quieter operation because of the smooth sliding motion of the worm shaft. Unlike gear motors with teeth, which may click as the worm turns, worm gear motors can be installed in a quiet area. In this article, we will talk about the CZPT whirling process and the various types of worms available. We’ll also discuss the benefits of worm gear motors and worm wheel.
worm shaft

worm gear

In the case of a worm gear, the axial pitch of the ring pinion of the corresponding revolving worm is equal to the circular pitch of the mating revolving pinion of the worm gear. A worm with one start is known as a worm with a lead. This leads to a smaller worm wheel. Worms can work in tight spaces because of their small profile.
Generally, a worm gear has high efficiency, but there are a few disadvantages. Worm gears are not recommended for high-heat applications because of their high level of rubbing. A full-fluid lubricant film and the low wear level of the gear reduce friction and wear. Worm gears also have a lower wear rate than a standard gear. The worm shaft and worm gear is also more efficient than a standard gear.
The worm gear shaft is cradled within a self-aligning bearing block that is attached to the gearbox casing. The eccentric housing has radial bearings on both ends, enabling it to engage with the worm gear wheel. The drive is transferred to the worm gear shaft through bevel gears 13A, one fixed at the ends of the worm gear shaft and the other in the center of the cross-shaft.

worm wheel

In a worm gearbox, the pinion or worm gear is centered between a geared cylinder and a worm shaft. The worm gear shaft is supported at either end by a radial thrust bearing. A gearbox’s cross-shaft is fixed to a suitable drive means and pivotally attached to the worm wheel. The input drive is transferred to the worm gear shaft 10 through bevel gears 13A, one of which is fixed to the end of the worm gear shaft and the other at the centre of the cross-shaft.
Worms and worm wheels are available in several materials. The worm wheel is made of bronze alloy, aluminum, or steel. Aluminum bronze worm wheels are a good choice for high-speed applications. Cast iron worm wheels are cheap and suitable for light loads. MC nylon worm wheels are highly wear-resistant and machinable. Aluminum bronze worm wheels are available and are good for applications with severe wear conditions.
When designing a worm wheel, it is vital to determine the correct lubricant for the worm shaft and a corresponding worm wheel. A suitable lubricant should have a kinematic viscosity of 300 mm2/s and be used for worm wheel sleeve bearings. The worm wheel and worm shaft should be properly lubricated to ensure their longevity.

Multi-start worms

A multi-start worm gear screw jack combines the benefits of multiple starts with linear output speeds. The multi-start worm shaft reduces the effects of single start worms and large ratio gears. Both types of worm gears have a reversible worm that can be reversed or stopped by hand, depending on the application. The worm gear’s self-locking ability depends on the lead angle, pressure angle, and friction coefficient.
A single-start worm has a single thread running the length of its shaft. The worm advances one tooth per revolution. A multi-start worm has multiple threads in each of its threads. The gear reduction on a multi-start worm is equal to the number of teeth on the gear minus the number of starts on the worm shaft. In general, a multi-start worm has two or three threads.
Worm gears can be quieter than other types of gears because the worm shaft glides rather than clicking. This makes them an excellent choice for applications where noise is a concern. Worm gears can be made of softer material, making them more noise-tolerant. In addition, they can withstand shock loads. Compared to gears with toothed teeth, worm gears have a lower noise and vibration rate.
worm shaft

CZPT whirling process

The CZPT whirling process for worm shafts raises the bar for precision gear machining in small to medium production volumes. The CZPT whirling process reduces thread rolling, increases worm quality, and offers reduced cycle times. The CZPT LWN-90 whirling machine features a steel bed, programmable force tailstock, and five-axis interpolation for increased accuracy and quality.
Its 4,000-rpm, 5-kW whirling spindle produces worms and various types of screws. Its outer diameters are up to 2.5 inches, while its length is up to 20 inches. Its dry-cutting process uses a vortex tube to deliver chilled compressed air to the cutting point. Oil is also added to the mixture. The worm shafts produced are free of undercuts, reducing the amount of machining required.
Induction hardening is a process that takes advantage of the whirling process. The induction hardening process utilizes alternating current (AC) to cause eddy currents in metallic objects. The higher the frequency, the higher the surface temperature. The electrical frequency is monitored through sensors to prevent overheating. Induction heating is programmable so that only certain parts of the worm shaft will harden.

Common tangent at an arbitrary point on both surfaces of the worm wheel

A worm gear consists of two helical segments with a helix angle equal to 90 degrees. This shape allows the worm to rotate with more than one tooth per rotation. A worm’s helix angle is usually close to 90 degrees and the body length is fairly long in the axial direction. A worm gear with a lead angle g has similar properties as a screw gear with a helix angle of 90 degrees.
The axial cross section of a worm gear is not conventionally trapezoidal. Instead, the linear part of the oblique side is replaced by cycloid curves. These curves have a common tangent near the pitch line. The worm wheel is then formed by gear cutting, resulting in a gear with two meshing surfaces. This worm gear can rotate at high speeds and still operate quietly.
A worm wheel with a cycloid pitch is a more efficient worm gear. It reduces friction between the worm and the gear, resulting in greater durability, improved operating efficiency, and reduced noise. This pitch line also helps the worm wheel engage more evenly and smoothly. Moreover, it prevents interference with their appearance. It also makes worm wheel and gear engagement smoother.
worm shaft

Calculation of worm shaft deflection

There are several methods for calculating worm shaft deflection, and each method has its own set of disadvantages. These commonly used methods provide good approximations but are inadequate for determining the actual worm shaft deflection. For example, these methods do not account for the geometric modifications to the worm, such as its helical winding of teeth. Furthermore, they overestimate the stiffening effect of the gearing. Hence, efficient thin worm shaft designs require other approaches.
Fortunately, several methods exist to determine the maximum worm shaft deflection. These methods use the finite element method, and include boundary conditions and parameter calculations. Here, we look at a couple of methods. The first method, DIN 3996, calculates the maximum worm shaft deflection based on the test results, while the second one, AGMA 6022, uses the root diameter of the worm as the equivalent bending diameter.
The second method focuses on the basic parameters of worm gearing. We’ll take a closer look at each. We’ll examine worm gearing teeth and the geometric factors that influence them. Commonly, the range of worm gearing teeth is one to four, but it can be as large as twelve. Choosing the teeth should depend on optimization requirements, including efficiency and weight. For example, if a worm gearing needs to be smaller than the previous model, then a small number of teeth will suffice.

Recent Posts

gearboxes agricultural

As one of leading gearboxes agricultural manufacturers, suppliers and exporters of mechanical products, We offer gearboxes agricultural and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearboxes agricultural.