Material Managing Electrical power UNIT one
Basic Description
This power unit is created for your fork lift field, consisting of hugely effective gear pump, DC motor, manual increase and reduced valve, tank, ect. The up and down motion are controlled from the lever with the guide release valve, that is outfitted with an electric switch to activate the motor. The lowing speed is managed from the strain compensated flow handle valve.
Special Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned in advance of installation of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
4. Oil altering is needed soon after the initial 100 operation hrs, afterwards as soon as each 3000 hours.
5. The electrical power unit shown is designed to be mounted horizontally.

Material Managing Electrical power UNIT two
Common Description
This electrical power unit characteristics electrical power up gravity down circuit. Activate the commence solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve together with the reducing pace controlled from the stress compensated flow control valve. Goods of this series is often widely used in the market of logistic gadgets including fork lift, mini lift table, etc.
Exclusive Notes
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic elements concerned just before mounting the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which need to also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
four. Oil modifying is needed following the preliminary 100 operation hours,afterwards once each 3000 hrs.
five. The energy unit needs to be mounted horizontally.